-
1
About This File
This mod replaces the front middle skirt in order to mount a 3.5in touchscreen display for Klipperscreen. It has two printed parts: the main body and the front plate. Threaded inserts go into the main body and the M3x8 screws are used to mount the front plate onto the main body.
BOM
- 5 threaded inserts (stock)
- 4 M3x8 BHCS
- 3.5in TFT Display
Software
Klipperscreen
Follow this tutorial to install Klipperscreen on your Raspberry Pi.
LCD Show
Ssh into your Raspberry Pi and execute the following commands
sudo rm -rf LCD-show
git clone https://github.com/Lcdwiki/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show
sudo ./MHS35-show
