-
4
About This File
Probe Mount with ADXL for PCB Klicky
Use the free space above the PCB Klicky Probe for an ADXL!
This mount is a new variant of: https://github.com/tanaes/whopping_Voron_mods/tree/main/pcb_klicky
ADXL345: https://amzn.eu/d/dJvU8Zh
ADXL345 is attached with 2 M2.5 screws.
I didn't solder the JST-XH 3 pin header to the PCB Klicky board, but soldered the cables directly to the board. There is not enough space for the header.
happy printing!
