6 4 2 Details Changelog 0 Questions 21 Comments 0 Reviews 0 Tutorials Support Recommended Comments Tuerlich 0 Posted July 5, 2022 Share Hi, is the idler_arm missing or is it the same like the original Galileo? Quote Link to comment Share on other sites More sharing options... 3dPmamsih 91 Posted July 5, 2022 Share No its different sorry i will check this Quote Link to comment Share on other sites More sharing options... 3dPmamsih 91 Posted July 5, 2022 Share Idler Guide uploaded 1 Quote Link to comment Share on other sites More sharing options... Sijder 0 Posted July 6, 2022 Share Hey, so what is the difference to original galileo? I have one with SB right now and its working fine. 1 Quote Link to comment Share on other sites More sharing options... 3dPmamsih 91 Posted July 6, 2022 Share definitly not a big difference betwwen the two version because they share same Gears and mechanism BTW, i didnt saw the Galileo for the SB before you mentioned this but i started this mod way back then but unfortunatly i dosn't have enough time to share until now .. Quote Link to comment Share on other sites More sharing options... Sijder 0 Posted July 7, 2022 Share 20 hours ago, 3dPmamsih said: definitly not a big difference betwwen the two version because they share same Gears and mechanism BTW, i didnt saw the Galileo for the SB before you mentioned this but i started this mod way back then but unfortunatly i dosn't have enough time to share until now .. Ah ok, got it. Galileo for SB is the normal galilo, since its compatible with clockwork 1 carriage, which you can also use with SB. Quote Link to comment Share on other sites More sharing options... PiEyed 11 Posted July 7, 2022 Share Galileo with Stealthburner mod. 2 1 Quote Link to comment Share on other sites More sharing options... claudermilk 1,862 Posted July 8, 2022 Share Is that on CW1 or CW2 carriage? Quote Link to comment Share on other sites More sharing options... PiEyed 11 Posted July 8, 2022 (edited) Share 4 hours ago, claudermilk said: Is that on CW1 or CW2 carriage? It's the x_carriage_frame_left_MGN12.stl & x_carriage_frame_right_MGN12.stl from the Voron Trident folder. They don't designate as Clockworks 1 or 2. I believe it is Clockworks 1 with a 12mm linear rail mount, but I'm not positive. I know a Clockworks 1 fits on it without a problem because that is what the original files show for the build. Edited July 8, 2022 by PiEyed Quote Link to comment Share on other sites More sharing options... Ponciaracer87 0 Posted July 9, 2022 Share Can you put a verision of the rear without the built in support so we can use are own settings, I'm finding the support gap between the part to big. Quote Link to comment Share on other sites More sharing options... 3dPmamsih 91 Posted July 10, 2022 Share in the slicer You can Right Click on the body split = to objects Quote Link to comment Share on other sites More sharing options... chainbreaker 3 Posted July 28, 2022 Share Is there a possibility you can make it compatable with the ercf? Really love this extruder and I just finished the ercf and would love to use it with this design 3 Quote Link to comment Share on other sites More sharing options... Zeek 0 Posted August 4, 2022 (edited) Share Any chance we could get the Rear_Gate in a STEP file? Tried converting it in freeCAD with no luck. Trying to tweak it for a EBB36 CAN module and design a bracket for it. Thanks! Edited August 4, 2022 by Zeek Quote Link to comment Share on other sites More sharing options... sofacoder 3 Posted August 18, 2022 Share Just a note for those that take their gears out of an afterburner galileo mod into this one: The gears have switched sides! that means you need to invert your direction `dir_pin` in your klipper extruder settings [extruder] dir_pin: !PD6 # The is inverted now 3 Quote Link to comment Share on other sites More sharing options... madorax 0 Posted September 4, 2022 Share I want to ask what do you think about the orbitrer extruder that can be converted to Galileo type v1.5 or v2.0? Quote Link to comment Share on other sites More sharing options... PawelMF 1 Posted October 22, 2022 Share add a filament sensor, it will be great 1 Quote Link to comment Share on other sites More sharing options... RodimusPrime98 3 Posted November 7, 2022 Share Any chance to add ERCF Sensor like: https://www.printables.com/model/177987-voron-stealth-burner-ercf-galileo-filament-sensor- Also looking for a mount and cover for a Hartk ERCF PCB. Quote Link to comment Share on other sites More sharing options... fedgez 2 Posted November 15, 2022 Share ERCF Sensor would be nice also. I wonder why put the latch on that side (other than aesthetics)? It makes it difficult to use the SB PCB by Hartk. Having that side accessible to mount a PCB could also work to the advantage of people doing canbus or similar with an umbilical. There isn't much clearance behind the tool head, but in comparison the sides have enough room for those features. Quote Link to comment Share on other sites More sharing options... RodimusPrime98 3 Posted August 21, 2023 Share Is there a version that could support a side mount Hartk tool head board? Sort of like this? Quote Link to comment Share on other sites More sharing options... tbmallow 0 Posted October 5, 2023 Share Is it possible to get the cad with all of the printed parts? I would like to mod the cable cover for additional room (+5mm or so) Quote Link to comment Share on other sites More sharing options... Jaqo 0 Posted November 5, 2023 Share I made an ERCF mod, so feel free to use it https://github.com/jaqo/Galileo-stealthBurner_ERCF_sensor Quote Link to comment Share on other sites More sharing options... Join the conversation You can post now and register later. If you have an account, sign in now to post with your account. Add a comment... × Pasted as rich text. Paste as plain text instead Only 75 emoji are allowed. × Your link has been automatically embedded. Display as a link instead × Your previous content has been restored. Clear editor × You cannot paste images directly. Upload or insert images from URL. × Desktop Tablet Phone Submit Comment
Tuerlich 0 Posted July 5, 2022 Share Hi, is the idler_arm missing or is it the same like the original Galileo? Quote Link to comment Share on other sites More sharing options...
3dPmamsih 91 Posted July 5, 2022 Share No its different sorry i will check this Quote Link to comment Share on other sites More sharing options...
3dPmamsih 91 Posted July 5, 2022 Share Idler Guide uploaded 1 Quote Link to comment Share on other sites More sharing options...
Sijder 0 Posted July 6, 2022 Share Hey, so what is the difference to original galileo? I have one with SB right now and its working fine. 1 Quote Link to comment Share on other sites More sharing options...
3dPmamsih 91 Posted July 6, 2022 Share definitly not a big difference betwwen the two version because they share same Gears and mechanism BTW, i didnt saw the Galileo for the SB before you mentioned this but i started this mod way back then but unfortunatly i dosn't have enough time to share until now .. Quote Link to comment Share on other sites More sharing options...
Sijder 0 Posted July 7, 2022 Share 20 hours ago, 3dPmamsih said: definitly not a big difference betwwen the two version because they share same Gears and mechanism BTW, i didnt saw the Galileo for the SB before you mentioned this but i started this mod way back then but unfortunatly i dosn't have enough time to share until now .. Ah ok, got it. Galileo for SB is the normal galilo, since its compatible with clockwork 1 carriage, which you can also use with SB. Quote Link to comment Share on other sites More sharing options...
PiEyed 11 Posted July 7, 2022 Share Galileo with Stealthburner mod. 2 1 Quote Link to comment Share on other sites More sharing options...
claudermilk 1,862 Posted July 8, 2022 Share Is that on CW1 or CW2 carriage? Quote Link to comment Share on other sites More sharing options...
PiEyed 11 Posted July 8, 2022 (edited) Share 4 hours ago, claudermilk said: Is that on CW1 or CW2 carriage? It's the x_carriage_frame_left_MGN12.stl & x_carriage_frame_right_MGN12.stl from the Voron Trident folder. They don't designate as Clockworks 1 or 2. I believe it is Clockworks 1 with a 12mm linear rail mount, but I'm not positive. I know a Clockworks 1 fits on it without a problem because that is what the original files show for the build. Edited July 8, 2022 by PiEyed Quote Link to comment Share on other sites More sharing options...
Ponciaracer87 0 Posted July 9, 2022 Share Can you put a verision of the rear without the built in support so we can use are own settings, I'm finding the support gap between the part to big. Quote Link to comment Share on other sites More sharing options...
3dPmamsih 91 Posted July 10, 2022 Share in the slicer You can Right Click on the body split = to objects Quote Link to comment Share on other sites More sharing options...
chainbreaker 3 Posted July 28, 2022 Share Is there a possibility you can make it compatable with the ercf? Really love this extruder and I just finished the ercf and would love to use it with this design 3 Quote Link to comment Share on other sites More sharing options...
Zeek 0 Posted August 4, 2022 (edited) Share Any chance we could get the Rear_Gate in a STEP file? Tried converting it in freeCAD with no luck. Trying to tweak it for a EBB36 CAN module and design a bracket for it. Thanks! Edited August 4, 2022 by Zeek Quote Link to comment Share on other sites More sharing options...
sofacoder 3 Posted August 18, 2022 Share Just a note for those that take their gears out of an afterburner galileo mod into this one: The gears have switched sides! that means you need to invert your direction `dir_pin` in your klipper extruder settings [extruder] dir_pin: !PD6 # The is inverted now 3 Quote Link to comment Share on other sites More sharing options...
madorax 0 Posted September 4, 2022 Share I want to ask what do you think about the orbitrer extruder that can be converted to Galileo type v1.5 or v2.0? Quote Link to comment Share on other sites More sharing options...
PawelMF 1 Posted October 22, 2022 Share add a filament sensor, it will be great 1 Quote Link to comment Share on other sites More sharing options...
RodimusPrime98 3 Posted November 7, 2022 Share Any chance to add ERCF Sensor like: https://www.printables.com/model/177987-voron-stealth-burner-ercf-galileo-filament-sensor- Also looking for a mount and cover for a Hartk ERCF PCB. Quote Link to comment Share on other sites More sharing options...
fedgez 2 Posted November 15, 2022 Share ERCF Sensor would be nice also. I wonder why put the latch on that side (other than aesthetics)? It makes it difficult to use the SB PCB by Hartk. Having that side accessible to mount a PCB could also work to the advantage of people doing canbus or similar with an umbilical. There isn't much clearance behind the tool head, but in comparison the sides have enough room for those features. Quote Link to comment Share on other sites More sharing options...
RodimusPrime98 3 Posted August 21, 2023 Share Is there a version that could support a side mount Hartk tool head board? Sort of like this? Quote Link to comment Share on other sites More sharing options...
tbmallow 0 Posted October 5, 2023 Share Is it possible to get the cad with all of the printed parts? I would like to mod the cable cover for additional room (+5mm or so) Quote Link to comment Share on other sites More sharing options...
Jaqo 0 Posted November 5, 2023 Share I made an ERCF mod, so feel free to use it https://github.com/jaqo/Galileo-stealthBurner_ERCF_sensor Quote Link to comment Share on other sites More sharing options...
6
4
2
.thumb.png.763b4453924800b636402ef582ec979f.png)
Recommended Comments
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.