Jump to content

Trident Bed Fans v. 2022.04.04

   (0 reviews)

This mod was imported into our database, If you are the author of this mod, please contact us so we can set your profile as the author!
 Share

1 Screenshot

  • Like 3
  • Voron FTW! 1

About This File

Trident Bed Fans

Andrew Ellis's Bed Fans, adapted to mount on a Trident. See his mod for some useful macros and more information.

Bill of Materials (per fan):

  • 1x 5015 Blower Fan
  • 2x M3x20 SHCS
  • 1x M3x8 SHCS
  • 2x M3 Threaded Insert

Install Instructions (per fan)

Note: Install the printed mount onto the extrusion before attaching the fan. The mounting screw will be inaccessible once the fan is attached.

  • Heat-set the threaded inserts into the holes in the L-shaped section
  • Add one M3 T-nut to the rear-facing slot of the bed extrusion
  • Use 1 M3x8 SHCS to attach the printed mount to T-nut, aligning the bump in the printed part with the slot on the extrusion.
  • Pass 2 M3x20 SHCS through the fan mounting holes and screw into the threaded inserts to attach the fan to the printed mount
 Share



User Feedback

×
×
  • Create New...