Jump to content

LoudOwl Aka Stabby v. 2021.08.22

   (0 reviews)

This mod was imported into our database, If you are the author of this mod, please contact us so we can set your profile as the author!
 Share

9 Screenshots

  • Like 1

About This File

LoudOwl aka Stabby

This is alternative part cooling fan solution which uses dual 5015 fan setup for Afterburner Toolhead. Replaces original parts that house 4020 fan or any other similar type of mod. This mod is more of situational add on for PLA or similar type filaments which might require a lot of cooling (or printing at super high speeds). It is not constant solution as it increases gantry weight.

Hardware

  • 2x 5015 24v fans
  • 1x M3x20 SCHS (DIN912)

Printing

There are two sets of STLs. One with inbuild supports and one without (for those who trust their slicers autosupports). Tested with recommended settings for Voron parts: 4 perimeters, 5 tops/bottoms, 40% infill. Though it is possible to use less plastic to reduce weight of plastic parts: 3 perimeters, 3 tops bottoms, 15-25% infill. Both versions of STL were tested by printing and assembling !!!

Assembly

First print out

 Share



User Feedback

×
×
  • Create New...