About This File
G'day, another nice thingy from down under. MeanWell UHP PSUs are great: nice, slim, compact, mains and DC on opposite sides... Well, but how to mount them on DIN rails? Alright, Dropbears to rescue. Pick an adapter for your UHP (they have different width), print 2 of them and 4 of rs25_psu_bracket_clip.stl.
Printing and plasic
Standard Voron part printing guidelines to follow: 0.4 nozzle, 0.2 layer height, etc.
This part is not exposed to any significant heat, so you could probably use even PLA.
- 8 x M3 hex nuts
- 8 x M3x12 SHCS screws
- 4 x M3 suare nuts
- 4 x M3x10 SHCS screws
Put square nuts in slide pockets, secure them with screws, then bolt down rs25 brackets, so square nuts are trapped.