Search the Community
Showing results for tags 'skirt'.
Found 7 results
-
Version 1.0.0
101 downloads
Front Skirts with Keystone Opening for Voron V2.4 350 -
Version 1.0.0
6 downloads
I know some might feel this is a dumb design but as a tester, I prefer it goes. Just in case things went south Print as standard instruction. Use M3 8mm to mount (You might want to use heat inserts) PETG/ABS is good enough -
Version 1.0.1
438 downloads
This is a remix of Demosth's excellent Skirt Fan Mount. I found the stock fan mount to be flimsy and easy to break off the extrusion. Demosth's version is a lot better but still only uses a single screw. I also wanted to use my red fan grills for extra flair. I added three additional features: 4 more holes to secure the mount to the extrusion any way you want (if using the outer most holes, you'll need to attach the mount to the extrusion first before attaching the fans and grills). You can still only use a single screw to mount it on the extrusion if you're feeling lucky, but I recommend using at least two. 3mm through holes to allow using custom fan grills (just as on the stock fan mount, you'll need to add heat inserts to the fans). Side profile for a snug and elegant fit against the part A and B side skirts, adds to the overal sturdiness of the assembly. This version is provided in 3 variants: Solid_Skirt_Fan_Mount_Channel: with profile walls and cable channel Solid_Skirt_Fan_Mount: with profile walls, no cable channel Solid_Skirt_Fan_Mount_Open: without profile walls on the side. (no idea why you'd want this one) All models are watertight and print as normal. No supports needed.- 5 comments
-
- 16
-
-
-
-
Version 1.0.0
62 downloads
In my travels upgrading Anycubic mega-S printers, I created a sdcard socket mount for the cabinet to plug into a MKS Robin Nano control board. I remixed my design to add the same functionality in my Voron 2.4r2 300mm build. I can create other skirt mods if there is interest. printed parts right skirt with sdcard socket modification sdcard mount sdcard cover Other parts required 6 M3x8mm screws for mounting sdcard extension cable You do need a micro sdcard to sdcard extension cable. I picked up mine on Amazon made by Lanmu. It is a 500mm long extension cable and works well with the hardware positioning that I did for my machine. They do make a 250mm also which may work better for some installations. All you need to do is remove the plastic end cover for installation in the mount I designed. -
Version 1.0.0
53 downloads
Adapted from the original power_inlet_IECGS_ part to accommodate a Schaffner FN9280 Ultra Compact Filtered IEC power module. Left and Right versions provided. Modded using Sketchup Pro 2022 (skp file provided). Model is 100% watertight and easy to print. The 4mm holes accept regular M3 heat inserts to secure the power module's flange (using M3x12 cone head machine screws). -
Version 1.0.0
134 downloads
Adapted from the original front_skirt_a_350 part to accommodate a ZF Rocker Switch WRG32F2FBREN. The cut-out for the switch is following the manufacturer's specifications, and is tapered to make removal of the switch easier. Left and Right versions provided. Modded using Sketchup Pro 2022 (skp file provided). Model is 100% watertight and easy to print. -
Version 1.0.0
128 downloads
[Voron 2.4 350] Open grill for the side skirt. Fits in snuggly. 2 screws. Modified from the original models using Sketchup Pro 2022 Pro (SKP file also provided). STL is 100% watertight and easy to print, and easy to modify to make smaller versions. I'm sure someone else must already have made a similar one, but I couldn't find any with a lazy search.
