Jump to content

LED Holder v. 2021.12.23

   (0 reviews)

This mod was imported into our database, If you are the author of this mod, please contact us so we can set your profile as the author!

4 Screenshots

About This File

LED Strip Holder


Works on Trident & 2.4 any size.

This mod lets you mount LED strips inside your printer. I mounted three in mine and it is like daylight inside the box.

I used these 24V strips from Amazon and connected them to a fan output on my Octopus board. Works a treat.

You can mount as many "strips" in your printer as you like. I have one on the front rail and one on each side for a total of three. You can cut the strip at the solder obrounds and connect them with wire to go around the corners. I run the wire in the extrusion down to the controller and use an extrusion cover to hold the wires in.

https://github.com/VoronDesign/VoronUsers/raw/master/printer_mods/DerekBackus/LED_Holder/Images/LED_Holder_ISO.png https://github.com/VoronDesign/VoronUsers/raw/master/printer_mods/DerekBackus/LED_Holder/Images/LED_Holder_Side_View.png




User Feedback

  • Create New...