Search the Community
Showing results for tags 'ramalama2'.
-
Version 2021.09.01
864 downloads
Misumi Cable Clip Credits: Eddie from the Voron-Team (From his awesome Misumi Led Clips) Printing: Default Voron settings, correct orientation, no supports Bom: Nothing Description: It's a stupid Clip to hide your cables stiff and secure inside that extrusion cutout. You can scale this in Z-Size to whatever you want. By default it's 8mm, as i find it the perfect size. Please don't even try to print only one of this, it's tiny, you need layer-time xD Pictures: -
-
Version 2021.09.01
590 downloads
Purge bucket (Klicky) Mod. Credits: @edwardyeeks: Decontaminator Purge Bucket & Nozzle Scrubber Basically his design is already perfect, there is nothing really to improve on it. I just made a small Cut-Out for the Klicky (which you can do tbh yourself with a side cutter xD) Printing: Default voron settings, correct orientation, no supports needed! Bom: see: Decontaminator Purge Bucket & Nozzle Scrubber Description: The bucket itself is v2.4 350 only compatible. I don't know and can't test the dimensions of a 300/250... But it's a dumb cutout anyway only. Description (Only for Blurolls-Kit Owners) The Blurolls kit includes M4 Knurling-Nuts, that are a bit smaller and shorter as BOM (DIN466) ones. The difference is: BOM-> height: 9,5mm / OD=16mm Blurolls->height: 8mm / OD=12-14mm So for exactly this reason, this repo includes a modified Brush-Holder. -
Version 2021.08.31
203 downloads
Misumi LED Corner Clips Credits: Eddie from the Voron-Team (From his awesome Misumi Led Clips) You get his LED Clips in Discord, he didn't published it to Voronusermods sadly :-( Printing: Default voron settings, correct orientation, no supports Bom: Nothing Description: Corners for the awesome Led Clips from eddie, to hide the wires and one blanklet. No need to cut or recable your wiring, this clips are meant to hide already existing cables. You will find out how it works once you print and try it :-) You can modify their Z-Size as you need, simply scale it. Don't scale below 75% and above 150%. Below 75% the wires will probably not fit on the exit. And above 150% it will just have an big wire exit and will look weird. Pictures: -
Version 2021.09.01
222 downloads
Stiffer DIN Mount Credits: Voron-Team: Its the default generic DIN Mount, but modified! Printing: Default voron settings, correct orientation, no supports needed! Bom: 2x M2x10 Self-tapping Screw Description: Stiffer generic Din Bracket (same as the one for the pi, but it sits much tighter on the din rail. I found the voron ones a bit wobbly on the din rails) You can use this bracket for everything else. Pictures: -
Version 2021.09.01
321 downloads
Exhaust 90° Mod (Guided max angle radius for smooth filament sliding) Credits: Voron-Team: Its the default 2.4 Exhaust, but modified! @falo2k: Magnetic Grill Cover (Awesome guy, my Grill Cover is exactly his Grill Cover, only with a recessed filament hole, to match the Exhaust 90° Mod.) So all credits to him! Printing: Default voron settings, correct orientation, no supports needed! Bom: 6x M3 heat inserts 4x M3x25 SHCS (Fan Screws) 2x M3x8 BHCS (Grill Screws) 4x 6x3 Magnets (Grill) 4x 6x3 Magnets (Cover) Foam Tape, please check falo2k for this Magnetic Grill Cover PTFE Tube (3mm ID / 4mm OD) 2x Mount Pieces Description: Exhaust Mod with as less as possible ptfe tube bending. The ptfe tube is guided. I highly recommend an 4mm OD and 3mm ID ptfe tube. But all other ptfe tubes fits either. The magnetic cover parts are a nice touch. Housing: Only modified for better printability. So no supports needed and it's easy printable. You don't have to use this whole set. The housing is compatible with all -
Version 2021.08.31
61 downloads
Wago 221 DIN Mount Credits: Voron Team :-) Printing: Tolerances are very tight, print only with calibrated flowrate Default voron settings, correct orientation, no supports Bom: 2x M2x10 Self-tapping Screw Description: Simple design for 1/2/3 x 221 5-port wagos. I didn't found anything here that is mountable to din rails, so i made one simply. The wagos are sitting in there pretty extreme, so you don't need to worry about opening -
Version 2021.08.31
261 downloads
ADXL Skirt Connector mount (Dupont Version) Credits: @alch3my: The plug is based on his skirt insert base, which works amazing btw. Printing: Tolerances are very tight, print only with calibrated flowrate Default voron settings, correct orientation, no supports Bom: 2x m3x8 or m3x12 screws. 3x 3-pin Dupont 3x 4-pin Dupont 1x 8-pin Dupont (for adxl itself) Some cables (im using 30 20cm) Description: Should be self explanatory in the pictures! The ADXL Dragon mount is available here: https://github.com/Ramalama2/Voron-2-Mods/tree/main/ADXL_Dragon_Plug Pictures: -
-
Version 2021.09.01
54 downloads
Buttom Plate Bedhole Plug Credits: Everyone that can draw a Circle :-) Printing: Default voron settings, correct orientation, no supports Bom: Nothing Description: It's by default for Ø15mm hole on a 3mm plate, but you can simply scale it in your slicer to your needs. Pictures: -
Version 2021.08.31
136 downloads
Adxl Mount Heatblock (Dragon Version) Credits: @tzeman: https://www.thingiverse.com/thing:4897289 (V6 Plug) He inspired me for this Dragon Version! Printing: Tolerances are very tight, print only with calibrated flowrate To be safe, scale it to 102% in all dimensions. (It's designed to be scaled between 100 -
Version 2021.09.01
24 downloads
AB Motor Plug (Microfit) Credits: Myself xD Printing: Default voron settings, correct orientation Supports are needed (Check Pictures below) Bom: M3x8 M3 T-Nut Microfit 3.0 4-Pin Description: LDO motor steppers comes with that prewired steppers (which doesn't have a plug), so this is exactly for making a -
Version 2021.09.01
72 downloads
AB Motor Plug (Jst-XH) Credits: Myself xD Printing: Default voron settings, correct orientation Supports are needed (Check Pictures below) Bom: M3x8 M3 T-Nut JST-XH 4-Pin Description: LDO motor steppers comes with that prewired steppers (which doesn't have a plug), so this is exactly for making a