Search the Community
Showing results for tags 'Zen3D'.
-
Version 2021.08.24
134 downloads
Voron0 1515 T-Nut It is a great help during installation to prevent the nuts from moving. During the construction of Voron0, it comes in very handy with the screws of MidPanel, TopHat, BedMount. hardware: M3 Square Nuts from Aliexpress (5.5mm x 5.5mm x 2mm) (Recommended!) or M3 hex nuts. The hex nut is too high, it is difficult to print because only one or two layers get under the nut. (depending on the frame) But it also works. The MakerBeam version is lower than the LDO version. print settings: layer height: 0.2mm -
-
-
Version 2021.08.24
36 downloads
Voron0 dual color skirt set (SSR, PowerSwitch, Nameplate) To match the skirt with the Midpanel with Hex Pattern by sterminatore's idea print settings: layer height: 0.2mm color change at 0.6mm / 2.2mm Skirt.stl, Skirt_mirror.stl Left and right skirt part with 40 degree chamfers for color change printing. There is an extra hole for tightening the middle M3 screw. Skirt_EmptyNameplate.stl Empty nameplate for serial number. For example, with Tinkercad you can easily put the number on it. Here's a quick tutorial: Skirt_SSR.stl SSR holder with led window. Skirt_PowerSwitch.stl 12mm x 19mm windows for power switch. Example power switch on aliexpress: On/Off Switch 6A-10A 110V 250V 21MM*15MM Overview