Version 2022.01.21
216 downloads
A mod to mount the LGX Lite to the current X carriage.
Additional Hardware:
LGX lite mount
4* M3x12 SHCS
don't forget to install the included nuts with the LGX lite into the extruder housing.
4* heatset inserts
Chainmount:
2* M3x30 SHCS
low head to match the originals but regular work
2* M3x20 threaded spacer
2* M3x8-14mm BHCS
length isn't critical as long as it's between 8 and 14mm
2-3* heatset inserts
Installation:
Install heatsets into printed parts.
Remove the motor and install the nuts included with the LGX.
Attach the LGX to the mount.
Reattach the motor using the longer screws.
Thread the spacers on the exposed screws behind the motor.
Screw the chainmount onto the spacers.
Attach to the carriage.