Search the Community
Showing results for tags 'reQu1em00'.
Found 1 result
-
Version 2022.03.19
100 downloads
V0 Kirigami bed front with space for LED This is a modifaction of the V0 Kirigami front bed made by Kosh42EFG BOM Kirigami bed: https://github.com/christophmuellerorg/voron_0_kirigami_bed 1x Kirigami_LED_Bed_Front.stl printed in ABS using standard Voron settings 1x Kirigami_LED_Bed_Front_defuser.stl printed in any white material 2x M3x8 CHCS 2x M3 nuts 1x LED. I use a single neopixel mini button 4x wires for the neopixel (you can use three if this is the only one in the chain) Installation Install the kirigami bed Wire the neopixel and place in the slot with the wires coming out through the tunnel Add the defuser in front of the neopixel, make sure it is a tight fit to hold it well (print thicker if needed) Fit the Kirigami_LED_Bed_Front.stl to the front of the kirigami bed using the M3 screws and nuts Add configuration change to the printer.cfg in klipper: [neopixel my_leds] pin: PA8 chain_count: 1 color_order: GRB initial_RED: 1.0 initial_GREEN: 0.0 initial_BLUE: 0.0
