Search the Community
Showing results for tags 'al3ph'.
-
-
Version 1.0.0
17 downloads
Led holder for WS2812 type LED strings, includes channel for data line to loop back for second strip. Includes additional print support (between led strip retainers), which needs to be removed before use. Mounts on top of the top extrusion, using 2 M3 bolts per strip, two strips required per side, (so they can be printed on V0). It does not interfere with the top hat. -
Version 1.0.0
9 downloads
Voron themed filament detection. I fancied making my own simple filament detection module, using spares from my Voron V0 build, and here it is.. BOM 4x M3 Nut 4x M3x6 bolt (SH/BH) 2x M2x10 Self Tapping Screws 1x Omron Mouse Button - Micro Switch Bowden tube can be inserted to guide the filament in to the module, you might need to fettle this, as it maybe a bit tight and restrict the filament movement. There should be very little friction if all goes well. The module works in either direction, it should be mounted away from the extrusion motor, as klipper buffers commands, so the further from the motor the better. I printed with 0.4mm nozzle 0.2mm layer height, no supports need. Print one of each STL. -