Search the Community

Hello! I just installed a Mellow Fly SB2040 Max V3 on my Voron Trident and I can't seem to get klipper to use the eddy probe (although everything else including the probe temperature sensor seems OK). Klipper just shuts down with "MCU 'SB2040' shutdown: I2C Timeout" and I get "Unable to obtain 'i2c_read_response' response" in the console when I try to calibrate the probe. I am using the reference configuration from the Mellow web site for the eddy probe [probe_eddy_current fly_eddy_probe] sensor_type: ldc1612 i2c_address: 43 i2c_mcu: SB2040 i2c_bus: i2c1b x_offset: 0 # remember to set x offset y_offset: 21.42 # remember to set y offset z_offset: 2 # remember to set z offset i2c_speed: 4000000 I tried commenting out i2c_speed but it made no difference. @mvdveer, I read your unboxing post from 2024 so I know you have used this probe before. Any ideas on troubleshooting this? Thanks in advance for your help! - Jonathan

Hi everyone, I have been working on this project for quite a long time now. About 6 months - 1 year and it is finally ready to be published. This is the main site: 3D Printer Color Configurator (3dprinter-color-configurator.com) This is the site for voron printers: Voron Color Configurator (3dprinter-color-configurator.com) I have developed a site/tool where you can create, visualize and configure how you want your Voron color theme to look like. Users can now create everything from the default color groups (primary and accent color + chain and frame) to a very unique looking build, where up to 8 different groups of parts can be colored. While you find the color theme you want, you can also configure the printer you are building, download that configuration and afterwards go to the download center and fetch the STL bundle (ZIP) that corresponds to the configuration chosen. My Color Configurator currently support all Voron Printers with the default config, as well as a 8 accent config. Voron V2.4 also has 7 accent version. All colors used are based on eSUN ABS(+) and Keene Village Plastics (ABS), where each and every color is labeled with the color name they represent. OBS. I am not working for or is affiliated with the Voron Design Team, but is working on an individual project of my own free will. All credit for the CAD and STL files goes to the Voron Team. In the future, I will potentially add more printers from other brands. I am open for feedback, so contact me by mail or here on the forum, if you have any problems, can provide additional information or informational fixes, grammar fixes or have suggestions for the website. Your suggestion will be added to the roadmap if it has enough interest. An example is shown below: Then download configuration: Voron-V2.4-8accents.pdf And download the STL bundle (ZIP) from download center: Happy designing