New Voron 2.4

[Dale]

Hi.  I am in process of tuning my new Voron 2.4.  

 

Dale

[smirk]

Hi Dale

Welcome aboard, there's a load of people here with great experience tuning their 2.4's. Might be worth considering doing it as a build diary (even though the printer is built,you'll probably end up adding mods ) and that would be a good way to share with everyone and get some useful feedback, help, encouragement and tips on the process.

In terms of tuning print quality a good starting point is Andrew Ellis' work

[mvdveer]

Welcome Dale. I fully second @smirk in tuning according to https://github.com/AndrewEllis93/Print-Tuning-Guide. It is timely but well worth it in the end.

[claudermilk]

Welcome to the forum, and I'll add a third recommendation to the Ellis tuning guide. It is well worth the time and effort to follow, and you will be amazed at what the printer can do afterwards.

[Dale]

Thanks for all the feedback.  I will use his guide.  I used it on my voron v.0.  I am getting my euclid probe .cfg file going now.  After I will complete my superslicer calibration test.  Then I will take it to the next level with the guide.

I love tinkering, and this fits the bill.