Milo 1.5 + Casa

[PFarm]

34 minutes ago, NewGradRN said:

My Milo barely reach the end of the table going in because of the lost distance from the rail cover so I want to extend the spindle forward. I measured 40mm distance between the spindle tool center (mill thread tool mounted) and the table Y end at homed position so 12-20 forward I think is good. Got 1 of this bracket off of Amazon then split it in a half.

I have one of these that came with my spindle. 

[NewGradRN]

Here is the Step for the Plate Adapter

Milo 80mm Spindle Mount Plate - Single Bolt.step

[PFarm]

In the last part I milled, I noticed that since I've done the resin pour and stiffened the Z column, even using a cobalt drill bit, there's no squealing.

[TDG]

Hey Jake here from the milo dev team someone on the discord is looking for new Grads V1.5 feet any chance either of you guys could post them up for craig6580 on the millennium discord cheers

 

[PFarm]

Welcome to the forum, Jake. I don't have the file, but I'm sure @NewGradRN would be glad to share it on Discord.

[NewGradRN]

Just got back from a tour. Sorry, just now saw the message... Here are the Mount STL files..

Milo 1.5 Legs FR-RR.stlMilo 1.5 Leg FL-RL.stl

[PFarm]

29 minutes ago, NewGradRN said:

Just got back from a tour. Sorry, just now saw the message... Here are the Mount STL files..

Milo 1.5 Legs FR-RR.stl 375.67 kB · 0 downloads Milo 1.5 Leg FL-RL.stl 375.67 kB · 0 downlo

All good, someone in Discord designed one for him.

[NewGradRN]

Cool, Please let me know if there's any interest in what ever I have. I am more than willing to share them. Thanks