Jump to content

Hi from Watford


ProfChris

Recommended Posts

I've decided to build a Voron 2.4 as I would like a bigger build space than my current Prusa Mk3.9.  I have taken the decision to go down the Duet/RepRap route for the controller as I like the wiring simplification occasioned by the use of the toolhead board. I already have another xy table machine controlled by the Duet/RepRap combination - better the devil....... Given my experience with the Prusa I'm using the Tap z probe with a G2 extruder and Rev0 hot end. I'm sure that there will be a number of challenges along the way.

I've now sourced all of the major components, and am waiting for them to arrive. I'm using the Prusa to print the plastic parts in ABS+ - all seems to be going well on that front with only minor warping issues initially - now overcome.

I'm happy to hear from others with a similar configuration, and to share my experiences/solutions

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...