Trident config with octopus and tft50 display

[Mike 03251]

I am trying to understand what to put into the display portion of the klipper config file for the components indicated in the subject line. Can anyone point me in the direction of the details I need?

[Ab_Gonzalez]

The tft50 runs from the pi not the board so you need to follow instructions to install klipperscreen 

[SirThunderCloud]

so don't put anything in the display portion, because you do not have a display connected to the board.  Instead you will be running KlipperScreen on the raspberry pi which talks to klipper through the Moonraker API. 

[psxstudio]

3 hours ago, SirThunderCloud said:

so don't put anything in the display portion, because you do not have a display connected to the board.  Instead you will be running KlipperScreen on the raspberry pi which talks to klipper through the Moonraker API. 

Yeah.  Don't uncomment any display in the display portion (if using default voron config) and follow the klipperscreen instructions.

[claudermilk]

While he used a different screen, reviewing the Steve Builds Trident streams would be helpful. He installed the Waveshare touchscreen using Klipperscreen and connected to the Pi. It seemed pretty easy. I think it's the last one, #7.