Jump to content
  • 0

Problem printing the corners



Working on my trident build. When I’ve printed the corners (legs) they always seperate in the same spot. Different rolls of abs, different brands. The stl file says the file is not water tight and it highlights the same area the pice separates at. Anybody else have this issue?

Link to comment
Share on other sites

2 answers to this question

Recommended Posts

  • 0

Ran into the same issue on the parts for my xy joints. So I upped temp 5 slowed down the print speed (using an flsun v400) greased the arms and completely enclosed it. My two upper units came out fine. So something in that I think was causing the problem just don’t know which. It works now so I can press on with my trident build and get back to the 2.4 build. 

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...