Jump to content
  • 0

Ender6  with a creality board 4.3.1  motherboard and orbiter v2




I have an Ender6  with a creality board 4.3.1  motherboard and orbiter v2 I can get it work any help would be appreciated.

microsteps: 16
full_steps_per_rotation: 200
rotation_distance: 4.637
nozzle_diameter: 0.400                              #define nozzle diameter
filament_diameter: 1.750
max_extrude_only_distance: 500
max_extrude_only_velocity: 120
pressure_advance: 0.025                         #to be calibrated
pressure_advance_smooth_time: 0.03     #to be calibrated

[tmc2208 extruder]
uart_pin: PE1
interpolate: true
run_current: 0.85 #**
hold_current: 0.100
sense_resistor: 0.11 #**
stealthchop_threshold: 0
driver_TBL: 0
driver_HEND: 6
driver_HSTRT: 7
driver_TOFF: 4    
heater_pin: PA1
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PC5 #to be calibrated


Link to comment
Share on other sites

0 answers to this question

Recommended Posts

There have been no answers to this question yet

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...