New Joiner

[lacouelle]

Hi 
I bought recently a Trident 300, Rev C LDO Kit , already set-up, mounted, aside a Prusa CoreOne+ and a MK3S+, and a MMU3.
I discovered 3D Printers around 15 months ago, with a MK3S+ from Prusa bought as a second hand.
I had issue with this first printer with big parts, due to a difficult bed leveling. I tried several mods, set up etc, to improve my bed , and finally discovered that the 3 screws out of 6 maintaining the heatbed on the Y-carriage were too long by 2mm (14mm rather than 12mm), touching the heatbed, making bed leveling screws adjustments impossible.
I learnt a lot with this printer, but I still have a lot to learn 3D Printing.
I bought the CoreOnePlus recently, 4 weeks ago, and it is clearly a step up compare to the MK3S+.....No more manual bed leveling with the C1+.
Also, aside Prusa, I was looking at the Voron Printers since few months, first for the look  and then for the perfs.
Seeing YT video and reading docs, I finally found one, close to my home (15kms) and, as I am curious, I took this opportunity to discover it in reality and not only on video or picture.
I was really surprised by the quality of the built and parts and also not that big for a 300 compare to a Mk3S+ under the original enclosure.
The possible fine tuning is really a plus for me. 
30 min alter, it was mine.
So I am happy to read your posts going forward and learn from your experience.