Prusa XL Enclosure: Is It Worth It for Large Prints and High-Temperature Filaments?

[adam57]

 

Has it yielded better print quality, or has it printed large prints more successfully, for anyone using a Prusa XL enclosure? I’m particularly curious about how the Prusa XL enclosure works with ABS, ASA, Nylon, and long prints. Do you think a Prusa XL enclosure is necessary or only beneficial for some materials/ use cases?

 

[mvdveer]

19 minutes ago, adam57 said:

Has it yielded better print quality, or has it printed large prints more successfully, for anyone using a Prusa XL enclosure? I’m particularly curious about how the Prusa XL enclosure works with ABS, ASA, Nylon, and long prints. Do you think a Prusa XL enclosure is necessary or only beneficial for some materials/ use cases?

Just as a general principle - printing any of this materials would need an enclosure, especially ABS and ASA. Also filament needs to be dry

[Repman]

For ABS, ASA, Nylon you need an enclosure to avoid warping. 
To improve print quality a preheater and dryer is usefull as it helps to get a smoother surface und to avoid porosity.

The Vorons have the enclosure "build in". For drying I use a Creality Filement dryer ( https://store.creality.com/de/products/creality-space-pi-filament-trockenbox). This one works perfectly.

So if you want to print the above mentioned materials I would not start without an enclosure. I tried it on my first printer  ( a hadron)  in earlier times. It is a mess...

[geekandi]

I bought the Prusa enclosure for my XL 5TH and .. never built it - the XL had become my PLA/PETG monster and I already had other Vorons to take care of my ABS/ASA wants and needs. I should sell this thing as I am never going to build or use it.

In a different part of the house, I now have 2 Core One and a Core One L.

Some day I should look into doing an ROI on my conglomerate of printers.. stupid hobby.

[sam das]

 

An enclosure on the Prusa XL is mainly used to print ABS, ASA, and Nylon, especially for long or large prints, since it helps prevent warping. For PLA or PETG it’s not really needed. Dry filament and good slicer settings still matter a lot — I’ve had good results tuning profiles with orca slicer.

 

 

 

 

[claudermilk]

On 12/23/2025 at 7:37 AM, geekandi said:

Some day I should look into doing an ROI on my conglomerate of printers.. stupid hobby.

That sounds like a terrible idea!  

I use the rule of thumb applied to car projects: "never, ever add up all the project receipts". That way lies madness.

[geekandi]

2 hours ago, claudermilk said:

That sounds like a terrible idea!  

I use the rule of thumb applied to car projects: "never, ever add up all the project receipts". That way lies madness.

Yeah, well, uhm, I don't need to look at receipts at all; I can just gaze in the 2 rooms with printers to know I'm in well over $10k and have never, ever, sold a print of any kind.