Train Wreck repair has started.

[elmoskiller]

So tore into this today thought I would just look it over and start with the skirts. Noticed the wire is broken on the Beacon. But it looks like it got hot. Wasn’t there something about not using the beacon with the cb1/2 from big tree tech?

Also this has a manta cb2 board on it but he broke one of the hdmi plugs off.

So far those are the only two big problems. 

I am going to start by printing the skirts and work my way up. Found the right mount for BTT screen these cheese grater skirts. 

[TitusADuxass]

7 hours ago, elmoskiller said:

So tore into this today thought I would just look it over and start with the skirts. Noticed the wire is broken on the Beacon. But it looks like it got hot. Wasn’t there something about not using the beacon with the cb1/2 from big tree tech?

Also this has a manta cb2 board on it but he broke one of the hdmi plugs off.

So far those are the only two big problems. 

I am going to start by printing the skirts and work my way up. Found the right mount for BTT screen these cheese grater skirts. 

I've been using a CB2 / Beacon combination on my v2.4 without any issues. 

[elmoskiller]

Cleaned up the bay and got eve working but the touchscreen. It works when test it with a PC. The previous owner broke HDMI 0 off so I was hoping it HDMI 1 would kick in. What am I missing on this. I don’t see any thing in Klipper screen config. 
 

Also repinned the beacon plug and it seems to work as well. Going to wire it through the Nighthawk next. 
 

next I will be doing the Beefy mod and pin mods. Once I am able to set it up and test everything I plan on buying a box turtle add on. 
The CB2 does not like $ signs in the WiFi passwords  Wasted way too many hours on just logging into. 

Edited December 27, 2025 by elmoskiller

[zav3nd]

I wish my spaghetti was as clean as that. Might have to rebuild all my wires so I can have them that nice...