Artillery X1s to Voron Franken-Trident

[PFarm]

@mvdveer Inspired, multiple projects at one time, so why not start another one 

I had four Artillery X1s that I no longer used. No matter how modded they were, they never printed quality parts like the Trident and V2. I dismantled them and salvaged usable parts. It will be a little oddball since I'll use most of the X1 extrusion, so I may need to alter some parts to fit. Extrusion consists of 2040 and 2060, I use the stepper motors and leadscrews, and I have a spare BTT Octopus with 2209 mounted in one of the X1 and the power supply, so I'm using that as well. I have a BTT U2C for Canbus and a Klipper Expander for caselighting. I'll use TAP that I removed from V2 for initial setup, then convert over to Beacon.

Started printing parts, Spartan Obsibian Black Sparkle and Esun Peak Green

Edited April 24 by PFarm

[PFarm]

A bit of progress, extrusion cut, drilled and assembled.

[PFarm]

I found these two links for wiring and component mounting of the electronic bay. With this system, I can leave the bottom panel off!

Grid System 

 Wire Chase and Component Mounts

Edited Sunday at 09:49 AM by PFarm

[mvdveer]

11 hours ago, PFarm said:

I found these two links for wiring and component mounting of the electronic bay.

I have been using this on the printers for ants (Voron 0, Trizero, Boxzero and Micron - great system

[PFarm]

12 minutes ago, mvdveer said:

I have been using this on the printers for ants (Voron 0, Trizero, Boxzero and Micron - great system

That's good to hear, I think the other two printers will get changed out eventually.

[PFarm]

Mocked up the elect-bay love this grid system! Octopus Pro, Mellow 6150 PRO, 2 x 24v 50-watt PS (from Artillery X1), 1 x 36v 350-watt PS, BTT PI 4 Adapter/CB1

Edited Monday at 08:30 AM by PFarm