About This File
This mod is a combiniation of the official Voron 2.4 and Voron 2.2 z belt covers. It also incorporates the hidden cable routing from the mod by Akio.
* There are two versions of the covers. One with and one without the Voron logo.
* The covers are 5 mm tall so you need a gap of at least 5 mm between the z-rails and the extrusions for this cover to fit.
* Please take care when routing the cables in the electronics bay to make sure they do not rub against the belts.
Freecad and step files are in the github repo.